WIRING OF 3 & 6 CHANNEL FLICKER CONTROLLERS
3 Lamp shown, wiring is same with 6 lamp unit, except for 3 additional lamps.
 
The wiring of these controllers is quite simple and the controller and associated wiring can be generally fitted into many existing items or new projects. Make sure to use adequate insulation and that contact with the controller circuit board or lamp wiring (#18 AWG insulated) with any exposed metallic or conductive parts subject to human or animal contact is not possible. The 3 way lamp switch (for dim-medium-bright-flicker) may be omitted if only flicker flame effect mode is desired, simply leave unused terminals on PC board unconnected.
 
BACK TO FLICKER CONTROLLER PAGE
 
NORTH COUNTRY RADIO
PO Box 200, Hartford NY 12838-0200
EMAIL: support@northcountryradio.com            Tel 518-854-9280           Internet http://www.northcountryradio.com