PREFABRICATED CASES FOR KITS

Several cases are available for use with our kits. These are the smaller sizes that are often not carried by local distributors. They are not drilled so as to fit several different kits. Metal cases are made from easy to work aluminum sheet metal and are finished in blue and gray enamel, (except # NC1590, NC3124, and NC3321 which are die cast, and zinc alloy natural finish). Plastic Cases are furnished in Ivory with black front and rear removeable panels. All cases can be easily worked with hand tools for drilling and cutting operations. Available sizes are shown in table below.

P/N
Size inches
Applications
Price U.S. Dollars
NC 425
2.25W X 1.25H X 4.25D
Aluminum Case for MiniATV, ATVjr, Video Master IR Xmtr, CCD board cameras. Painted Blue and Gray
12.50
NC 531
3.00W X 1.25H X 5.50D

 

Aluminum Case for all ATV Xmtrs and Downconverters Video Master, CCD board Cameras, IR Rcvr, ATV Linear Amp, Video IF, VHF LPTV Xmtr. Painted Blue and Gray

 

13.50
NC 532
3.00W X 2.12H X 5.25D
Aluminum Case for All ATV Xmtrs and downconverters, CCD board Cameras. Has room for CCD camera, Battery pack, and Mini ATV or ATVJr. Use in place of case NC531 if a larger case is desired. Painted Blue and Gray
19.50
NC1550
5.00W x 1.50 H x 5.50D
Plastic Case replaces discontinued NC1500 for use with AM88, LF90, and MPX96. Ivory top and bottom with removeable black front and rear panels.

15.95

 

NC1575
6.00W x 1.62 H x 6.25D
Plastic Case replaces discontinued NC1500 for use with Video Palette 2, or MPX96, LF90, and AM88 if a larger case is desired. Ivory top and bottom with removeable black front and rear panels.
23.95
NC1580
6.00W x 2.25 H x 6.25D
Plastic case for MPX96 with 1 W Amplifier, for installation in one case. Use for AM88, LF90, or VPAL2 if a larger case is desired. Ivory top and bottom with removeable black front and rear panels.
24.50
NC 3590

3.70W X 1.30H X 4.70D

(Die Cast) will fit up to 3.00 X 4.00 PC Board

All ATV Xmtrs and downconverters, IR rcvr and transmitter, ATV Linear. This die cast case can be RF and weather gasketed and would be useable for outdoor applications. Natural (unpainted) finish
22.50

NC 3124

4.375W X 1.06W X 2.62D

(Die Cast) Will fit up to 2.00 x 3.50 PC Board

LF converter, Mini ATV, ATVjr, IR Transmitter. This die cast case can be RF and weather gasketed and would be useable for outdoor applications. Natural (unpainted) finish
17.50
NC 3321

1.50W X 1.08 X 3.62D

(Die Cast) Will fit up to 1.00 x 2.50 PC Board

Die cast case used for DC block For ATV Downconverter remote tuning, and active antenna DC block. Use also for preamps, test jigs, detectors, filters, etc. This die cast case can be RF and weather gasketed and would be useable for outdoor applications. Natural (unpainted) finish
10.75
NC 225
8.00W X 2.50 H X 6.00D
(Plastic) Ivory with Black blank front and rear panels. For MPX2000, ATV transmitters, Video receivers. Black case available on special order
29.95
 
PHOTOSi       COMPLETE CASE KITS      OTHER CASES        HOME        ORDER
 
TO RETURN TO PREVIOUS PAGE USE BROWSER BACK BUTTON 
 
NORTH COUNTRY RADIO
PO Box 200, Hartford NY 12838-0200
EMAIL: support@northcountryradio.com            Tel 518-854-9280           Internet http://www.northcountryradio.com