Infrared Illuminator Construction Photos


Above are two LED illuminator Assemblies with PC boards. The PC round board at lower right is a rectifier / filter assembly to convert 24V AC to DC for the round 40LED Illuminator assembly. The board at the top is a 96 LED unit for 12V DC operation	Close up of 40 LED Illuminator PC boards The boards are round to allow mounting in a housing made from 2 inch PVC pipe fittings

Close up of 40 LED 24 V AC Illuminator mounted inside a 2 inch PVC pipe fitting. This Illuminator uses 20 degree beam width LEDS	Close up of 96 LED (16 strings of 6 LEDs) 12V Illuminator PC board with 40 degree beam width LEDs. Note current limiting resistors in center of PC board