TYPICAL ACTIONS
8 Channel Animated Light controller and chaser system allows up to eight lamp loads to be sequenced in 32 selectable patterns or random flicker.
Capacity 6 Amps 720W incandescent load any channel, 2400 W at 120V AC, 4800 Watts @ 208-240V 3 wire total load. (20A supply circuit) Can be used with 12V low voltage outdoor lighting.
This microprocessor controlled system can be used for signs, displays, holiday lighting, special effects, etc. Great for Christmas lighting effects using multiple light strings. Uses ordinary incandescent lamps 12 to 240V 50-60 Hz AC only. Also works with LEDs and LED displays. Electronics portion is electrically isolated from 120 or 240 V lighting system supply for safety.
Assembled and tested:
156.50
Kit:
105.50
NOTE
BOTH AC AND DC CONTROLLERS WILL PRODUCE THE SAME PATTERNS
THESE ARE EXAMPLES
RANDOM EFFECT
ANIMATED DC LIGHT CONTROLLER AND CHASER
FOR 6 - 42V DC AUTOMOTIVE AND OTHER LOW VOLTAGE APPLICATIONS
8 Channel Animated Light controller and chaser system allows up to eight lamp or other loads to be sequenced in 32 selectable patterns or random flicker. DC version of our AC controller, & produces same patterns and effects. Capacity up to 6 Amps DC resistive load per channel. Can be used with 6, 12, 24, 32, 36 or 42 volt low voltage DC supplies, such as in automotive & marine applications, special effects lighting, battery operated displays, portable signs, theatrical uses, fairs, etc. wherever battery operation is needed.. Microprocessor controlled. Also works with LEDs and LED displays.
Assembled and tested:
156.50
Kit:
105.50